
Embedded Software Engineer in Sweden: skills, tools and where the jobs are
An embedded software engineer writes the software that runs inside physical products. That can be the control unit in a truck, the firmware in a heat pump, the radio software in a base station or the flight computer in a drone.
Unlike most software, embedded code runs on hardware with limited memory, limited processing power and strict timing requirements. A bug does not just crash an app. It can stop a production line or affect the safety of a vehicle.
Sweden has a large share of companies that build complex physical products, from vehicles and defence systems to telecom equipment and industrial automation. Demand is set to keep growing. According to SCB forecasts cited by Sveriges Ingenjörer, Sweden risks a shortage of around 11,000 engineers in energy, electrical and computer engineering and engineering physics by 2040. That makes embedded software one of the most in-demand engineering profiles in the country, and one where experience compounds quickly.
Already working in embedded? We are looking for Embedded Software Engineers in Stockholm, Gothenburg and Mälardalen. See the role and apply
Core skills employers look for
Job ads vary by industry, but the same foundation shows up almost everywhere.
- C and C++. C is still the language of microcontrollers and drivers. Modern C++ dominates larger embedded systems, especially in automotive and telecom.
- Rust and Python. Rust is gaining ground where memory safety matters, and there is now a Rust toolchain, Ferrocene, qualified for ISO 26262 and IEC 61508. Python is used for test automation, tooling and scripting around the embedded code.
- Hardware understanding. You need to read a datasheet and a schematic, and understand interrupts, memory maps, timers and peripherals such as GPIO, SPI, I2C and UART.
- Real-time operating systems. FreeRTOS, Zephyr and similar RTOSs are common on smaller devices. You should understand tasks, scheduling, priorities and synchronisation.
- Embedded Linux. Larger systems often run Linux. Experience with the Yocto Project or Buildroot, device trees and kernel drivers is a strong differentiator.
- Communication protocols. CAN and CAN FD in vehicles, Ethernet and TCP/IP in connected devices, Modbus and fieldbuses in industry, BLE and other wireless protocols in consumer and IoT products.
- Debugging and testing. Using a debugger on real hardware, an oscilloscope or logic analyser, and writing unit and hardware-in-the-loop tests.
Soft skills matter more than many expect. Embedded engineers sit between hardware, mechanics and system teams, so the ability to explain trade-offs clearly is part of the job.
Recognise yourself in this list? Experience with C/C++, microcontrollers, RTOS or embedded Linux is exactly what our Embedded Software Engineer role asks for. Read the requirements
Tools and standards you will meet
The toolchain depends on the product, but these are the names that come up most often in Swedish job ads.
- Development: GCC, Clang, CMake, IAR, Keil, STM32CubeIDE, VS Code
- Version control and CI: Git, Gerrit, GitLab CI, Jenkins
- Debugging: JTAG/SWD debuggers (Segger J-Link), GDB, oscilloscopes, logic analysers
- Automotive: AUTOSAR (Classic and Adaptive), Vector CANoe/CANalyzer
- Modelling: MATLAB/Simulink, code generation
- Testing: Unit test frameworks (Unity, GoogleTest), hardware-in-the-loop rigs
- Safety and quality: ISO 26262 (automotive), IEC 61508 (industry), DO-178C (aerospace), MISRA C/C++
- Security: ISO/SAE 21434, secure boot, encrypted firmware updates
You do not need all of these. But familiarity with the safety and coding standards in your target industry will make your CV stand out, because they shape how code is written, reviewed and documented.
Where the embedded jobs are in Sweden
Most embedded roles are found in four types of industry:
- Mobility and aerospace. Cars, trucks, construction equipment, rail, aircraft and defence systems. Electrification and software-defined vehicles have made this the largest employer of embedded engineers. Read more about mobility and aerospace.
- Energy and industry. Power electronics, grid equipment, charging infrastructure, robotics and industrial control systems. Read more about energy and industry.
- Digital and connectivity. Telecom equipment, network cameras, IoT and connected consumer products. Read more about digital and connectivity.
- Infrastructure. Signalling, traffic systems and monitoring of critical infrastructure. Read more about infrastructure.
Geographically, the work is concentrated in a few clusters:
- Gothenburg: cars, trucks and automotive suppliers, vehicle software and electrification. Around 50,000 people work in automotive and mobility in the region, according to Business Region Göteborg.
- Stockholm: telecom, defence, medtech and connected products.
- Mälardalen (Västerås, Södertälje, Eskilstuna): power and grid technology, industrial automation, rail, heavy vehicles.
- Linköping: aerospace and defence.
- Skåne (Lund, Malmö): network cameras, mobile and wireless technology, IoT.
Remote work is less common than in pure software roles, since embedded development often needs access to hardware and test rigs. Hybrid setups with a few days on site per week are the norm.
Based in Stockholm, Gothenburg or Mälardalen? Our open Embedded Software Engineer role covers all three regions. Apply in about five minutes
Career path: from junior to senior
There is no single ladder, but most embedded careers follow a similar progression.
- Junior (0–3 years). You implement well-defined features, fix bugs and write tests, usually within one part of the system. The focus is learning the hardware, the toolchain and the team's way of working.
- Mid-level (3–6 years). You own modules or drivers end to end, take part in design decisions and start reviewing others' code. Many specialise here, for example in drivers, connectivity, safety or embedded Linux.
- Senior (6+ years). You set the technical direction for a subsystem, make architecture trade-offs between hardware and software and mentor others. Seniors often work closely with system engineers and project management.
From senior level, the path usually splits. Some move towards software or system architecture, some towards technical leadership of a team, and some towards specialist roles such as functional safety or cybersecurity, where experience is scarce and highly valued.
How to get started or take the next step
If you are new to embedded, a degree in computer, electrical or electronics engineering is the most common route. But a strong portfolio can open doors on its own.
- Build something on real hardware. A project on an STM32, ESP32 or Nordic board, with drivers you wrote yourself and an RTOS, says more than a list of courses.
- Put it on GitHub. Include a short README with what the project does, the hardware used and the problems you solved.
- Learn the standards of your target industry. Basic knowledge of MISRA C or ISO 26262 is a clear advantage in automotive. IEC 61508 matters in industry.
- Describe outcomes, not just technologies. “Reduced boot time from 4 to 1.5 seconds” is stronger than “worked with embedded Linux”.
If you are already working in embedded, the most effective way to grow is usually to broaden your exposure: a new industry, a new layer of the stack or a safety-critical project.
Ready for your next embedded role?
We are hiring Embedded Software Engineers for assignments in Stockholm, Gothenburg and Mälardalen, across mobility, aerospace and connected products. If you have experience with C/C++, microcontrollers, RTOS or embedded Linux, we would like to hear from you.
See the Embedded Software Engineer role and apply. It takes about five minutes: tell us who you are, attach your CV and answer five short questions.
Want to know more first? Read about embedded systems as an area of expertise.
FAQ
What is the difference between embedded software and regular software development?
Embedded software runs on dedicated hardware with limited resources and often strict timing or safety requirements. Regular software usually runs on general-purpose computers or servers, where resources are far less constrained.
Which programming language should I learn for embedded?
Start with C, since it is used on almost every microcontroller. Add modern C++ for larger systems, and Python for testing and tooling. Rust is worth learning as it grows in safety- and security-focused projects.
Do I need an engineering degree to work in embedded?
Most employers ask for a degree in computer, electrical or electronics engineering. Engineers with strong hands-on projects and relevant experience can still get in without one, especially in test and integration roles.
Which industries hire the most embedded engineers in Sweden?
Automotive and heavy vehicles, telecom, defence and aerospace, energy and industrial automation.
Can embedded engineers work remotely?
Partly. Because the work often requires access to hardware and test rigs, most roles are hybrid with regular days on site.
How much does an embedded engineer earn in Sweden?
Salaries depend on education, experience and region. As a reference point, Sveriges Ingenjörer reports that graduate engineers in computer engineering and electronics who graduated in 2023 earned around SEK 38,800 a month before tax. Those who graduated in 2019 earned around SEK 50,800 in 2023. Up-to-date figures are available in their salary statistics.
Sources
- Sveriges Ingenjörer: engineer shortage and salaries (press release, Dec 2024)
- Sveriges Ingenjörer: salary statistics for graduate engineers
- Business Region Göteborg: Mobility in Gothenburg
- ISO 26262 Road vehicles – Functional safety
- IEC: Safety and functional safety (IEC 61508)
- RTCA DO-178C
- ISO/SAE 21434 Road vehicles – Cybersecurity engineering
- MISRA
- AUTOSAR standards
- FreeRTOS, Zephyr Project, Yocto Project
- Ferrocene, qualified Rust toolchain

